At present, large-volume injections are directly injected into human veins. Because of their rapid efficacy, they are widely used in medical treatment. Intravenous injections cannot avoid the need to use a large number of infusion bottles. Infusion bottles are often sealed with medical aluminum caps. Aluminum alloys have better mechanical properties. processing performance as well as user safety and convenience. Widely used in vials, cartridge bottles, oral liquids, etc.
The injection bottle seal uses 1060 aluminum strip, 8011 aluminum strip, 1060 aluminum strip, which is easy to manufacture and cheap. 8011 aluminum strip is commonly used for pull-type aluminum covers.
Alloy | 1060, 8011 |
Temper | H12,O,etc |
Thickness | 0.17-0.23mm |
Width | 50-1800mm |
Coil inner diameter | 76mm 152mm |
Surface type: | |
a. Flat milled aluminum strip b.DOS oil lubrication surface treatment c.Chromate treatment d. One side is gold/white/red/blue/black and other colors, and the other side is protective paint e.Double-sided varnish/transparent paint | |
Test items | high pressure sterilization test, Hgcl2 test |
Tensile strength | 130-155mpa |
Elongation | 2.5-3.5% |
Ear cutting rate | Up to 2% |
Packaging | Export standard wooden box. |
Alloy | Si | Cr | Cu | Mn | Fe | Zn | Mg | V | Ti | Other | Al | |
Total | Single | |||||||||||
8011 | 0.5~0.9 | ≤0.05 | ≤0.10 | ≤0.20 | 0.6~1.0 | ≤0.10 | ≤0.05 | - | ≤0.08 | 0.0 5 | 0.15 | Margin |
1060 | ≤0.25 | - | ≤0.05 | ≤0.03 | ≤0.35 | ≤0.05 | ≤0.03 | ≤0.05 | ≤0.03 | 0.03 | - | 99.6 |
1. It has the advantages of good cushioning, earthquake resistance, heat insulation, moisture resistance, corrosion resistance, etc. It is non-toxic, tasteless, non-absorbent, does not cause dust or peeling, and has very good sealing performance.
2. The appearance is exquisite, and the pattern design can use color printing, embossed characters, and milled characters.
3. It is destructive after opening and is anti-theft.
4. Simple structure and low cost.
Alloy Grade Thickness, Application, etc.
Quick reply within 30 minutes
One-to-one design and customized production plan