With technological innovation, the functions and production methods of aluminum bottle caps are also developing in a diversified and high-end direction. Aluminum bottle caps are not only mechanized and large-scale, but also low-cost, pollution-free and recyclable.
8011 aluminum closure sheets are used to manufacture screw cap systems for bottles and other containers and are one of the main products in the aluminum packaging market. Aluminum's air-tight and light-tight properties, as well as its ease of shaping and decoration, make it the material of choice for enclosed applications.
The 8011 H14 aluminum sheet used to make the screw caps is rolled to very fine tolerances, which improves sealing per ton of stock and allows for high-speed, multi-cavity non-stop operation. This closure sheet's strength, high formability, low earring and printable surface make it ideal for tamper-evident caps and vial seals.
Aluminum ROPP bottle caps are used in glass containers, including mineral water, natural water, non-alcoholic and alcoholic beverages, health products and juice products.
Alloy | 8011,3105 |
Temper | H14,H16 |
Thickness | 0.17-0.23mm |
Width | 800-1000mm |
Length | 600-1000mm |
Surface | 1. Flat milled aluminum strip 2. DOS oil lubricated surface 3. Chromate treatment 4. One side is gold/white/red/blue/black and other colors, the other side is protective paint 5. Double-sided varnish/transparent paint |
Test items | high pressure sterilization test, Hgcl2 test |
Tensile strength | 130-155mpa |
Elongation | 2.5-3.5% |
Earrings | up to 2%; |
Chemical Composition | ||||||||||||
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Other | Aluminum | |
Each | Total | |||||||||||
8011 | 0.4-0.8 | 0.5-1.0 | 0.1 | 0.1 | 0.1 | 0.1 | - | 0.1 | 0.05 | 0.05 | 0.15 | Remainder |
Temper | Thickness(mm) | Tensile Strength Rm MPa | Yield Strength Rp0.2 MPa | Elongation % A50mm | Bend Radius | Hardness HBWa | |||
H14 | 0.20-0.27 | min. | max. | min. | max. | 180° | 90° | ||
120 | 170 | 110 | 1 | 41 | |||||
H18 | 0.20-0.27 | 160 | 145 | 1 | 50 |
Alloy Grade Thickness, Application, etc.
Quick reply within 30 minutes
One-to-one design and customized production plan